Product Application

APPLICATION

Paints and Coatings

As a body pigment, it plays a role of covering and strengthening, thickening and preventing precipitation; low oil absorption rate, reducing the consumption of binding substances, and uniform distribution of pigment surface.

Increase the thickness of the paint film, so that the film is plump, solid, wear-resistant, while adjusting the rheological properties of the coating, coating is good, enhance the expansion ability of the coating, reduce cracks.

High refractive index, can play the role of flat agent in the coating, blocking the ability of visible light and ultraviolet penetration, prolong the life of the paint film.

The coating has a high surface gloss, better water erosion and buffer PH value performance, enhance corrosion resistance.

Related Product Applications

Calcium sulfate whisker

Calcium sulfate whisker is a new type of fibrous sub-nanomaterial grown in the form of single crystal, with uniform cross-section, complete shape and perfect internal structure. Calcium sulfate whisker has high strength, high modulus, high toughness, high insulation, wear resistance, high temperature resistance, acid and alkali resistance, corrosion resistance, good infrared reflectivity, easy surface treatment, easy to compound with polymer, non-toxic and many other excellent physical and chemical properties. The company prepared by a special process of anhydrous calcium sulfate whiskers, the basic performance indicators are as follows:

Calcium carbonate whisker

Calcium carbonate whisker is another new type of inorganic filling after nano calcium carbonate, non-toxic, odorless, white pine-like solid (under the microscope for needle-like single crystal) as a new generation of filling material The product has the following properties and characteristics: Comprehensive performance, high mechanical strength, and can reduce vibration, skid resistance, noise reduction and wave absorption during use; Good comprehensive performance, high friction coefficient, high wear resistance and heat resistance; Stable friction performance, good heat recession and heat recovery performance, especially the filling of calcium carbonate whiskers organically integrates friction increase and wear reduction in a system, with excellent high temperature friction and wear performance. Can reduce aromatic fiber, steel fiber, copper, the amount of potassium titanate and other high-value materials greatly reduces the cost of friction materials; the powder produced after the friction of the product is non-toxic and has little pollution.

Nano silicate whisker

Silicate whisker, also known as water-based inorganic ceramic diameter of 400 nm, aspect ratio> 50; high aspect ratio, ultrafine high whiteness, all inorganic non-toxic and tasteless, absolutely harmless to the human body. Mainly used in rubber, high-end plastics and paper.

Inorganic cotton

Inorganic fiber cotton as an efficient insulation material, compared with organic polystyrene, polyurethane and other foam insulation materials, fire non-combustible (Class A), does not have flame ignition and transmission, and its light bulk density, low thermal conductivity, fire prevention and non-toxic, stable chemical performance, long service life, is recognized as an ideal insulation material at home and abroad, widely used in construction and other industries. However, in the specific application process, inorganic fiber cotton board still has some problems, such as inorganic fiber cotton board moisture absorption is more serious, resulting in its drooping off; tensile strength is low, will peel from the wall; and the system protective layer cracking.

10 micron ultrafine wollastonite acicular powder

Wollastonite (Wollastonite), chemical name calcium metasilicate, composition CaSIO3, is a silicate mineral, triclinic crystal, aggregate is fibrous, needle-like, radial. Mineral is generally white, light gray. Wollastonite fiber wear resistance, enhanced performance, bottom oil absorption, high stability, insulation, making it an ideal functional filler in engineering plastics, rubber, coatings, paints and other fields.